Click the Green Links below for More Content

Trident is available in four throughput configurations. Single, double, triple and quadruple process chambers are available to correspond with door open time and throughput requirements. The Trident High Yield de-fluxing series (DUO, TRIO, QUAD) can provide a cost effective solution for high volume de-fluxing applications while maintaining the process control and operational costs of the Trident systems.

Each of our three Trident models (Trident ECO, Trident LDO, and Trident CLO) can be configured as a High-Yield model. In addition, Eco-Cyclers are available for our High Yield De-Fluxing models for completely zero discharge operation.

Each chamber is autonomous and is equipped with its own PC control system, chemical holding tank, drain lines, etc. Independent process chambers allow for maximum pb-free segregation as well as multiple wash chemical usage.

Which flux types is Trident capable of removing?

Trident is capable of removing all flux types in both leaded and pb-free applications.

Is Trident available in a fully closed loop design?

Yes. Trident ZDO is 100% closed loop. Wash solution is recycled internally and the rinse solution is captured and re-dionized in the Eco-Cycler. Running and Eco-Cycler with the Trident system alleviates any drain requirements and is our most environmentally conscious design.

What is the largest board size that can be cleaned in Trident?

Trident's standard board rack can accommodate assemblies with dimensions up to 19" x 20" (48cm x 50cm). With custom fixturing, Trident can accommodate assemblies up to 26" x 20" (66cm x 50cm).

Is Trident available in a DI water only design?

Yes. Trident CLO is fully closed loop and utilizes only DI water as a cleaning solution.

I want to use fresh chemical for every wash cycle. Is there a Trident design that is
compatible with this requirement?

Yes. All Trident models have the ability to use fresh chemical with every cycle. Trident ECO was specifically designed for this type of application.

Will a "batch" machine keep up with my throughput requirements?

This answer depends on a few variables. Trident is available in four throughput configurations. The High Yield series of Tridents (DUO, TRIO and QUAD) allow for higher throughput volumes while maintaining the power, chemical and water efficiency of our batch cleaners.

What are the Power requirements for this system?

Tridents are available in 208, 240 and 400 VAC configurations. They are all 3 phase and pull 40 amps per chamber.

What are the dimensions of the Trident system?

Trident is 44.5" x 44" x 79". Each additional chamber adds approximately one more length to the overall dimensions.

Where are these systems manufactured?

All Aqueous Technologies products are manufactured in Southern California, USA.

How long is a typical cycle?

Trident's average cycle time is 30 minutes for wash, rinse and dry.

Which de-fluxing chemicals are compatible with Trident?

Trident's plumbing is 100% stainless steel and compatible with most modern de-fluxing chemicals that are soluble in water. Please consult an Aqueous Technologies team member for specific recommendations.

Print Trident Technical Data